Home-QTH setup:
|
Rig's |
Antenna's |
|
Main rig : Yaesu FTdx-3000
|
2 el monobander beam for 20m |
|
Rig for remote setup: Kenwood TS-590
|
3el beam for 10m |
|
Rig for VHF/UHF : Yaesu FT-847
|
Windom for 80 - 10m |
|
Rig for portable use: Yaesu FT-817
|
Windom for 60-30-15 |
|
Rig for local QSO's on VHF/UHF : Yaesu FT-8900
|
Vertical for 30m |
|
Rig for APRS / Winlink on VHF/UHF : Yaesu FT-8900
|
Vertical for 6m /2m/70cm |
|
|
4 el beam for 6m
|
|
|
5&8 el beam for 2 m/70cm
|
The 6 meter season have started in Norway.
This year I have made a SDR receiver, and monitoring 50.070 MHz - 50.102 MHz.
Antenna is a vertical located in JP20qh.
Heard CW CQ calls will be spotted at Reverse Beacon Network - RBN
http://www.reversebeacon.net
I will be active on CW and SSB from home QTH - JP20qh , my summer QTH - JP20mh (EU-055) and from my car.
CU on the air
Remote setup in hotelroom:
From May to October I am also QRV from my summer QTH
Sotra Island
EU-055, JP20MH
Weather in Sotra:
http://aprs.fi/weather/a/LA1QDA-1
Rig HF: Kenwood TS-480
Rig VHF/UHF: Yaesu FT-8800
Antenna for VHF/UHF : Vertical
Antenna for 6 m : 3 el beam + 2 el Quad
Antenna for HF: Dipole for 80m, 20m . Windom 80 - 10 m
LA1QDA/M
Rig: Yaesu FT-100 w/LDG Z-100 tuner
Antenna: Maldol HFC for 20 & 15 mtr, , Comet UHV-4 for 10 & 6 mtr
+
semi-homemade antenna for 60 mtr (see picture, only 165cm high)
It's a rebuild 80mtr antenna.
Behind the 60 mtr antenna you can see my antenna for APRS.
Here I am using HFC-20 antenna (95cm high)
You can also find me QRV on 60 meter around 5.380 Mhz driving along the westcoast of Norway.
