Hello there new to hf properly as recently new radio in house (ft-857d 1/2 size g5 rv and a ldg at-200pro antenna tuner and a sharmas x510nvertical for 2 m and 70cm) and now g0ksc innov 8 element lfa 2m yagi and a 70cm 17 element dk7zb long yagi (4m long ) one 3 ele 6m sandpiper yagi +ts530s with 1/2sze g5rv and multiband homemade end fed wire.
I Have recently also change my coax for the from rg213 to ecoflex 15 to reduce the feed line losses to the antennas even more the co-linear is onecoflex10 .I have also got shf electoniks mvv144-vox mvv mvv432-vox mast head preamp currently on the 2m and 70cm yagis in the shack as Ionly have 12m ecoflex 15 on each yagi. My new rotatar is a spid rau with usb interface
You will see me working actively on the 144mhz and 432 mhz and 50Mhz ukac just using the yagis.
WAB SQUARE = SD51
My other interests include computers and being IT Eng as its my job.i have a pet rabbit and i also like motorbikes
I also hold m6oto and 2e0usr, other callsigns held as wel,l include the Queens Jubilee MQ0NST and the Olympic special event callsign MO0NST ( these were during 2012 )
I am a CURRENT MEMBER 2013 OF CHORLEY AND DISTRICT AMATEUR RADIO SOCIETY ( www.cadars.org)
For my logbook when i am not mobile i tend to use Ham Radio Delux and for contesting before I import to ham radio delux i use the Minos contest logger and the logbook can be viewed also on www.hrdlog.net, this is setup to automatically send an Eqsl card
IF YOU WANT A QSL I WILL SEND VIA BUREAU TO YOU SUBJECT TO SENDING ONE TO ME, But I mainly send via eqsl as i enter into log via hrd as ,mentioned above.
You can check my log below to see if i have worked you.
(scammers out there nothing for sale here)
THANKS FOR LOOKING
my beams picture(aug2008 above very ol latest is below ) with my watson w300 colinear which was moved and changed to an x510nand my 1/2 size g5rv
below is the picture of my poles redone due to wind problems inDecemeber 2013
I hoping in he future to fit a larger 6m antenna and posibly a cobweb at some later stage onto themast at some later stage as well, but I ma to fit apole with a bearing on the side of it to protect the spid rau rotator.
Last modified: 2014-02-25 23:34:00, 3145 bytes
You must be logged in to file a report on this page
Currently updating logbook display.