Thanks for checking my Callsign PE1NHH and your visit to my QRZ.com info page

Current Propagation and Weather Conditions for Netherlands & Belgium

World clock to check the local times

--== My Station Setup ==--

Equipment I Use:

Icom IC-7600 All mode - 100Watt @ HF/50Mhz This is my main radio for HF

Kenwood TS-2000x All mode - 100Watt@ HF/50/144/430Mhz & 10Watt @ 1,2Ghz This is my main radio for VHF/UHF, it's also my backup radio for HF

Yaesu FT-817nd All mode - 5Watt @ HF/50/144/430Mhz This tiny fellow is my QRP radio and mainly used formobile operations

Microtelecom Perseus SDR HF Receiver .Controlled by Studio-1 Software My listening friend

The Icom IC-7600 & Kenwood TS-2000x Radio's are Software Controlled by HamRadioDeluxe + DM 780 for Digi modes

HF Antennas :

Beam : Dual Beam Pro by Pro Antennas suitable for 40 to 10 mtr band ( to be installed very soon !! )

Wire : End Fed 22mtr long suitable for 20 & 40 mtr band, mounted under slope from 12mtr's to 6mtr's high above street level, directed from North-East (highest level) to South-West (lowest level)

Wire : End Fed 16mtr long suitable for 160 to 6 mtr band, mounted under slope from 10mtr's to 5mtr's high above street level, directed from North (highest level) to South (lowest level)

(End Fed wire antenna's are feeded at the highest points)

Vhf/Uhf Antennas:

Comtex CT-Y-250 144/430Mhz 8 elements dual band Yagi horizontal mounted 14 mtr high above street level

Diamond X-5000 for 144/430/1200Mhz triple band single fiber vertical mounted 16 mtr above street level

Note : Antenna setup pictures will be available asap

QSL Cards :

Not available at this time,

Note:

So far this brief biography, any questions, suggestions and/or hints are always welcome, pls feel free to contact me: pe1nhh@gmail.com

Cluster :

My very valued visitors :