QRZ.COM
ad: elecraft
ad: L-HROutlet
ad: l-assoc
ad: l-innov
ad: l-rl
ad: l-gcopper
ad: L-rfparts
ad: l-WarrenG
ad: l-Waters
SM0DTK Sweden flag Sweden

Login is required for additional detail.

Email: Login required to view

Ham Member Lookups: 11289

 

During the years I have been building and testing a lot of wire antennas. One of the most interesting antenna is my MH-antenna which was described in the ARRL:s QST in March 2010. It is a small 3 element beam which works very well. This is a 18 MHz version:

This one is for 28 MHz:

Another interesting antenna is the Moxon antenna. This one is for 7 MHz:

The Flip Beam Antenna (FBA) is a variety of the Moxon antenna. You can change the direction of the antenna by a switch or relays at ground level. It has excellent F/B and gain is about 4-5 dBd. This one is for 7 MHz:

A vertical antenna called Spitfire for 7 MHz is shown here:

These dipoles for 21, 24 and 28 MHz is fed by the same coax cable:

This yagi for 28 MHz has a plastic boom and wires inside fishing rods for the elements:

Traps made of coax cable and wires supported by fishing rods makes a 2 element yagi for 21, 24 and 28 MHz:

This must be one of the smallest beams for 28 MHz. Elements are diamond loops:

This is a 2 element beam for 7 and 10 MHz. It uses traps and is designed almost as a Moxon antenna. The traps are designed by using VE6YP coaxtrap programme. The support line in the middle of the reflector is used to mechanical balance the antenna.

More antennas can be found at my website at: http://www.sm0dtk.se.

Good luck with your antennas! 73 de Martin

921109 Last modified: 2014-05-16 17:43:46, 2156 bytes

Login Required

Login is required for additional detail.

You must be logged in to file a report on this page

Please login now...

Currently updating logbook display.
ad: giga-db
Copyright © 2015 by QRZ.COM
Tue Apr 28 16:01:22 2015 UTC
CPU: 0.049 sec 41757 bytes mp