I like playing at QRP73
Homemade linear amplifier with 4cx 350f tube! 500 Watt pep.
Construction by SV2HWY.
5KW Air Inductor Load for 160m vertical antenna. Inductor constructed by
SV2HWY mechanical engineer and SV2GER electronic engineer.
Technical data: diameter Φ400 - coil height : 450mm - full height : 1000mm.
Wire : Φ8 copper pipping
3KW Antenna coupler "carrier" with remote controler.
Mechanical construction of coupler by SV2HWY / mechanical engineer.
Electronic construction of coupler and the remote controler by SV2GER / electronic engineer.
Mechanical construction of 20Kw (Carrier) Antenna Tuner And Variable Inductor by SV2HWY / mechanical engineer.
Electronic construction of 20Kw (Carrier) Antenna Tuner and the remote controler by SV2GER / electronic engineer.
Variable Inductor Top Gun for 160m Antenna Tuner
21.56 Kg wieght of Variable Inductor
Strong Runner inside of the Variable Inductor
Wire Dimensions 7mm x 14mm
Length (meter) of the Variable Inductor
Auto Antenna Tuner 20Kw Carrier
From the the Tee Antenna for 160m
The Backwards of the Antenna Tuner
Front side of the Antenna Tuner
Monobander Linear Amplifier for 160m with two 4cx1000 tubes
21m (70ft) from ground antenna tower
My antennas : 160m - 80m
160m full size inverter vee dipole
My antennas : 40m - 20m - 18m - 15m Full Size For Every Frequency Inverter Vee Dipoles
My antennas : 6m 3 element beam
My antennas : 2m 9 element beam
My antennas : 70cm Diamond 5.10
Check out my web blogspot : http://sv2hwy.blogspot.com
I use an online log: http://www.hamlog.eu
Page design by: Lefteris Pantelonas
Email : firstname.lastname@example.org
1840978 Last modified: 2015-04-03 16:23:38, 7530 bytes
You must be logged in to file a report on this page
Currently updating logbook display.