ad: hrd-2
ad: L-HROutlet
ad: l-rl
ad: L-rfparts
ad: Subscribe
ad: l-gcopper
ad: l-assoc

Login is required for additional detail.

Email: Login required to view

Ham Member Lookups: 4413


I was licensed in around 1971 or 1972 as a Technician. I lost my origional license in a move and don't know the exect date. The call was WB4YWI and I held it to March 9, 1998 when I upgraded to Advanced. I then changed my call to KU4PT. One year later in July 1999 I upgraded to Extra.

I don't origionate very many QSL cards, but I do send a card back from any that I receive. NO sase is needed or wanted.

The picture on my card is the antenna system. It is a 60 foot tower. At the top is a M2 432 antenna. Then a M2 9 element 144 antenna. The next one is a 5 element 6 meter beam that I built from plans on the internet. The bottom antenna is a TH-3. Not shown is a 6 meter vertical dipole at 35 feet. There is also a home built Carolina Windom about 125 feet long at 50 feet for the low bands and at right angles to that is an 80 meter dipole. Near the house are a couple of dual band 144/440 verticals for the local repeaters.

I mainly worked two meter SSB for a number of years. Also worked some RTTY on a 220 MHz repeater. I have done most of the work on a local 2 meter repeater on 146.73 for about the last 25 years. This repeater was started many years ago by K4GHR who was AA4R the last time I saw him. It was W4EXU (local club call)at one time , WR4AAA, and now it has my call on it.

The main low band is an Icom 746 PRO and a Drake L4B amp. The two meter SSB is a Yeasu FT-221r with a home made preamp driving one of the FAA amps that runs around 400 to 500 watts on ssb.

The ST-6 demodulator is for RTTY that is hooked into an old Teletype Model 19 printer just to the left of the desk.

There is a Yeasu 790Rll for 432 with a ARR preamp and 100 watt amp.

The power supply is an Astron 50 amp supply that powers most of the equipmnet on the desk.


I retired in 2012.  I worked as an electrician and instrument technician at a large plant that made polyester material.  We had 3 main products.  One went out looking like a bale of cotton, another was like a long string wound on a cylinder for making tire cord, and another was chips that were about 1/8 of an inch square and 1/4 of an inch long that was mainly sold to make into the plastic drink bottles.


6126377 Last modified: 2015-07-16 00:17:37, 2388 bytes

Login Required

Login is required for additional detail.

Apply for a new Vanity callsign...

You must be logged in to file a report on this page

Please login now...

QRZ Logbook Summary for - KU4PT
Latest Contacts for KU4PT at QRZ.com
dedateband mode grid Country op
W4HQ 2014-01-28 20m SSB EL96ut United States JEFFORY K HALL
N1EEQ 2014-01-23 20m SSB FN41jv United States CARL F CHACE, SR
WV7F 2014-01-14 20m SSB CN87wu United States Thomas L Jacobs
N1GMV 2013-12-30 20m SSB FM05tu United States John L Aceti
AB0ZB 2013-12-30 20m SSB DN98if United States GARY T SCHROEDER
K5ROC 2013-12-27 20m SSB EM34st United States Earl S Glover
K4WST 2013-12-23 20m SSB EL87ql United States Richard P Davies
KB7IUV 2013-12-23 20M SSB DM43ap United States MICHAEL A LOGAN
WO5R 2013-12-17 20m SSB EL19du United States ROBERT M INKS
K0CID 2013-12-13 20m SSB EN44ah United States Scott L Rick
K0UO 2013-12-09 20m SSB EM07rb United States STEVEN E WALZ
K9YM 2013-12-09 20m SSB EN52lk United States DAVID O LEWIS
KA1ILH 2013-12-09 20m SSB fn31no United States Chet
VA3NAZ 2013-12-05 20m SSB FN02mv Canada M Wasi Naz
KF5RSA 2013-11-27 20m SSB DM91rx United States Richard S Arvedson

Book Totals: 67 qso's   66 confirmed Get a free logbook at QRZ.COM

ad: giga-db
Copyright © 2017 by QRZ.COM
Thu May 25 23:59:21 2017 UTC
CPU: 0.096 sec 73815 bytes mp