Hi, my Name is Rob, born in 1982, I passed exam for my N licention in November 2012 and in November 2014 I passed exam for Full Licence 

 
My antennas are:
 
Comet GP 6, 2m & 70 cm vertical, 18 meter above sealevel.
 
8 element yagi vertical for 70 cm wide band antenna

Cushcraft MA5B 5 band minibeam 20 ,17,15,12,10 meter band antenna. 

Create CLP 5130-1 25 elements horizontal wideband dipole antenna 50 tm 1300 mhz, 20 meter above sealevel. and a 9 elerment Tonna crossyagi for 2 and a 19 element for 70 cm elevating .
 

 
Since I have my Full Licence I am active at  6 meter and 4 meter and 2 meter FM vertical and SSB horizontal DX and HF.Soon trying to make qso,s with satalite and meteor scatter at 2 and 4 meters . 

Every Sunday I Run a call round on 145.500 MHZ FM from 21:00 Dutch time . It,s called the ZARR , in Dutch Zondag Avond Roep Ronde or Sunday Evening Call Round .We Call vertical polarised and try to make the group as big as possible and try to make qso,s as farr as possible from the host QTH Nuland (PB2RVS) JO21RR nearby s,Hertogenbosch the capital city of the province Noord Brabant. For more information you can check our website WWW.ZARR.NL.

I also programming Teletron tmc 82 and 84 equipment for Amateurband and professional frequenties for 2 meters and 4 meters PM/FM only.
if you are interested for such equipment you can send me a email.

 

In August 2016 I build a tower 3/6 for bigger antennas and safer working on antennas than on the roof of my own house, the antennas are:  Hygain  TH3MK4  3 elements for 10 , 15, 20 meters . The 8JXX2  8 elements with boom length of 4,25 meters , 2 peaces for 144 mhz  and a 60 elements with a 6 meter boom for 23 cm .

In August 2015 I started a project to work satelite and to make my own automatic Rotor Controller together with Carlo PA1CVE to work at the K3NG software .

Now Its so far that the hardware is done , I have used a Arduino Mega 2560 board wih the ATE 201 and the ATE 202  IO board ans Relais board . The display is a 4*20 character alfanumeric display . 

After a quick assambly at a wooden plate it was time to make a real box around the arduino with all the components on one board and to make evrything detachable , The hardware is running well by now and only the communication with HRD has to be made , 

The Hardware Equipment I Use 

Crossyagi Tonna 9 elements 2 m.

Crossyagi Tonna 19 elements 70 cm.

Yeasu G 5500 Rotor Controller 

Arduino Controller with K3NG software

Radio Yeasu FT 847 with Microham usb III interface connected with Ham Radio Deluxe (last free version) 

 

  

Last week I made my first satelite qso with IK7XLW and I am glad with the short qso , I have a lot to learn to make better qso and to set the doppler and to find out to work perfect with HRD and when the controller is ready it will all be a lot easyer .

When you work satelite and you work with HRD please send me a email so we can talk about HRD and the other stuff.

PB2RVS 17-12-2015