Thank you for visiting my qrz.com page. here is a little bit about me :- I passed my foundation licence in April 2011 and have had many contacts all over with the call M6AUE i then went on and sucsessfully passed my intermediate in September 2012 , I was on CB radio in the 70s & 80s and a friend of mine introduced me to amateur radio and now i am addicted , my radios consit of a YAESU FT840 for HF work i also own a YAESU ft-7800 ( 2mtr & 70cm ), My antennas are a Diamond V2000 tri band and a Antron 99 on a 10ft pole mounted to the rear of the house and a home brew long wire for 20mtr & Inverted 'V' for 40&80mtr.
I hope to contact you on the many frequencies that are out there and if you do hear me please give me a call , now you all take care out there on the air waves good luck and good DX 73s, 44s.
I am a facebook group (https://www.facebook.com/groups/furnesshamradio) please check this site out. My WAB Squre is SD26 and my book number for Worked All Britain is 20629.
I am a supporter of the DX Code of Conduct:
I will listen, and listen, and then listen again before calling.
I will only call if I can copy the DX station properly.
I will not trust the DX cluster and will be sure of the DX station's call sign before calling.
I will not interfere with the DX station nor anyone calling and will never tune up on the DX frequency or in the QSX slot.
I will wait for the DX station to end a contact before I call.
I will always send my full call sign.
I will call and then listen for a reasonable interval. I will not call continuously.
I will not transmit when the DX operator calls another call sign, not mine.
I will not transmit when the DX operator queries a call sign not like mine.
I will not transmit when the DX station requests geographic areas other than mine.
When the DX operator calls me, I will not repeat my call sign unless I think he has copied it incorrectly.
I will be thankful if and when I do make a contact.
I will respect my fellow hams and conduct myself so as to earn their respect.