Currently qrv on 2m mainly MS/TR/AU/EME using 4x12 by I0JXXfull elevation, driven by Elecraft K3 / P3 + TR144H+40 Preamp ATF54143 and good power.
As well as on 3cm using IC706MK2G + Kuhne Transverter and Kuhne PA abt 10w into 48cm dish.
Now my main interest is 23cm EME using ether K3 or FT-847 on 28Mhz IF to drive Kuhne MKU13G3 + Pa delivering about max 100w into W2IMU feed that feeds a 5m mesh dish. Preamp by G4DDK.
See picture of current 23cm setup:
188482 Last modified: 2014-01-10 12:25:39, 740 bytes
You must be logged in to file a report on this page
Currently updating logbook display.