QRZ.COM
ad: L-HROutlet
ad: l-assoc
ad: l-rl
ad: l-Waters
ad: l-WarrenG
ad: l-gcopper
ad: l-innov
ad: L-rfparts
DM8MM Germany flag Germany

Login is required for additional detail.

QSL: VIA BUREAU

Email: Login required to view

Ham Member Lookups: 6620

 

18-APR-2015

Rohde & Schwarz SU 156 now with enclosure in quite good condition, tnx to Burkhard, DF5XV. On top three cavity filters Rohde & Schwarz, from stock of Bundeswehr.

 

 

5-APR-2015:

Yesterday I could tune my Rohde & Schwarz SU 156 im AM for the first time. Frequencies 144,567 MHz and 144,712 MHz.

That TX is excellent for 2 m AM. Six channels with XTALs, 200 WPEP out, 24/7. See first setup in my shack:

left the Mike from Beyerdynamic, Germany, Mixer Behringer Eurorack, Germany and in the right the Rohde & Schwarz SU 156, Made in Germany.

New adress since June 2014, my new locator is JO31ac.

My DOK: G13, previously R31, previously K32

 

On 18-OCT-2014 I put up the new antenna in the garden:

in the back on the roof of my workshop 4,2 kW of my new 8,5 kW grid parallel photovoltaic system

I was QRV the last years on 2m weak signal also as:

ZA1A, YO5/DL7AJA, EA3/DM8MM, EA6/DM8MM, EA8/DL7AJA, EA8/DM8MM, TK/DL7AJA and from I, ON, PA0, OE, HB9 as well.

Years ago I was the VHF/UHF/SHF manager of the DARC Distrikt "K", Rheinland-Pfalz and

I am a holder of the "Goldene Ehrennadel" of the DARC Distrikt "K", Rheinland-Pfalz, too.

In 2009 I tried to cross the Atlantic as VO1/DM8MM. Two weeks on the east coast of Newfoundland with 750 W and 13 dBD antenna, but no luck.

Watch: http://www.youtube.com/watch?v=IDk1fNSc9t0&list=UUYPf4kyf9z-78phC_QYXScg

and: http://www.youtube.com/watch?v=BmoAjLn7Wi8&list=UUYPf4kyf9z-78phC_QYXScg

 

Photo of my PA project: 3-1000Z for 2m, yes 2m!, first heating :-)

First heating of my 2m-PA with 3-1000Z

And this is my QTH in JO40AQ, 653 m ASL

Photo December 2011, 11 ele 2m Yagi from Tonna@20 m A.G.L. On the right, part of my 50m lattice tower with a 250 kW windturbine on the top

I am responsible for the 2 m beacon DM0DUB in JO40AQ on 144,436 MHz

I am responsible for the 70 cm beacon DB0AD in JO40AQ on 432,488 MHz

and on 6 m DB0DUB in JO31AC on 50,083 MHz

 

.

 

1884412 Last modified: 2015-04-18 16:55:06, 2769 bytes

Login Required

Login is required for additional detail.

You must be logged in to file a report on this page

Please login now...

Currently updating logbook display.
ad: giga-db
Copyright © 2015 by QRZ.COM
Sat Apr 25 14:42:03 2015 UTC
CPU: 0.046 sec 42794 bytes mp