IK4CIE: i'm a TOP-BANDER ! See you on160m !
Hello old man, i'm Victor, amateur radio from Italy. I'm born june 29,1965 and my amateur licence date april 13,1983. I'm an electronic engineer working in radio repeaters environment. In radio, i work mostly CW for DX QSOs. At the moment, i made over 24.000 QSOs; i reach the DXCC CW HONOR ROLL in 1994 and i have all countries in mixed, only missed P5 in CW .Also owner of the difficult 5B-WAZ 200 zones award. My radios are Yaesu FT 1000D, FTdx5000, FT2000D and TS590; ULTRABEAM dynamic antenna 3 element from 10 to 40m; half-sloper for 80m and inverted L for 160m, plus a receiving loop; DXCC and all 40 WAZ zones reached in top-band, more than 230 countries worked, i like this band !
Yagi 5 element for 6 meter band. My major interest is working new countries in CW mode, but i make some QSOs also in RTTY ,PSK31, SSTV, and SSB. Thank-you for reading this, i hope to see you next. Please visit my internet site at www.sanmicheletiorre.it/ik4cie 73 from ITALY de Vittorio (Victor) ik4cie
Was active also in 630m-472KHz band. TX home made CW, antenna inverted L with 17m vertical, 42m horizontal. Receiver FTdx5000 with antenna Wellbrook ALA1530. Now in stand-by.
DXCC Challenge over 2800 points.
Founder of WEDXC: Western Emilia DX Club
Also member MDXC n. 694, Marconi club Loano n. 349, Italy telegraphy club; member of national association A.R.I.
MY QTH LOCATOR JN54DQ 44°41'N-10°16'E
family picture, year 2005
OLD YAGIS AND EVERGREEN SLOPERS FOR LOW BANDS; now an inverted L is instead of the 160m sloper.
FT2000 AND FT1000D IN THE RADIO SHACK; now a FTdx5000 is instead of the FT2000
THE NEW ULTRABEAM ANTENNA:
WIFE and DAUGHTERS when in 2013
SON's in 2013
SOME IMAGES OF MY SMALL VILLAGE NEAR PARMA - NORTHERN ITALY
5BWAZ AWARD: very hard award !
SOME OF MY PAPER QSL CARDS:
CONTEST FIELD-DAY IARU Reg. 1, JUNE 2013, IK4CIE/p (also in LoTW) - Thanks to all the group of OM friends !
The QSL card ik4cie/p
Rev: IK4CIE -sept 27, 2014
6198100 Last modified: 2015-07-16 00:23:39, 4396 bytes
You must be logged in to file a report on this page