I work just also as :3Z0R - QSL via SP9SX
My name is Witold, but friends say to me shortly Witek.
On pictures is my country QTH. This is near Ukraine boarder ( loc; KN19dv) in small village Hadle .
I used in this QTH 4 tower’s:
tower 1 = 10 element LP 27 mH ( from 10Mhz up 50Mhz)
tower 2 = 4 element Yagi for 40 m 21mH
tower 3 = 6 element for 6m and 2 element delta loop for 14/12/28 16mH
tower 4 = 16 + 4 element Yagi 32 mH 4el/14MHz , 4 el. 18 MHz , 4 el.21 MHz,4 el. 24 MHz and 8 el. 28 MHz ( Optibeam 5B16).
and dipoles , GP for 80/160m.
Radio is 2 x IC756proIII and made at home PA 500 W out.
If I work with me from QTH Zabrze ( down town ) that’s mind that I used IC756 pro III and 300W CW and 500W SSB transistor amplifier ,dipoles for 80/160m and Ultrabeam Vertical 40-10 and 5 element Yagi for 6m and antenna 3-element Yage for 5 bands.See photo
Please send QSL via Danuta SP9SX.
Sorry ,but lot of QSL in bureau office is lost.
Danuta is my wife and make all paper work for as.
If you request QSL direct ,she answer only if you send SASE.
You must know that 1$ is so small amount in Poland a response to a letter to another country.
One US $ on SASE we reply only via bureau.
Please send only NEW IRC !
We prefer IRC, because in lot of country postman’s mafia looking for green stamps or Euro and we notice lot of lost letters.
Please look also :
Please look also :
3B7SP,3Z0RADIO,3Z9MRO, SO9R ,6V7K,A61AX ( guest operator 2005-2008) , G/GW/GM/ I/DL/OH/OA4/TI2/YN1/KH6/W7/ZP5/CX2/W7…… SP9MRO
If I work from QTH Zabrze ( down town ) =used IC756 pro III and 300W transistor amplifier dipoles for 80/160m ad GP others for HF bands and 5 element Yagi for 6m
3B7SP,3Z9MRO, 6V7K,A61AX ( guest operator 2005-2008) , G/GW/GM/ I/DL/OH/OA4/TI2/YN1/KH6/W7/…… SP9MRO
Please visit also www.qrzcq.com
1684664 Last modified: 2015-02-10 11:27:58, 7300 bytes
You must be logged in to file a report on this page
Currently updating logbook display.