The above link shows some photos of my station near San Diego, Ca. I have been an HF operator since 1976 and enjoy CW.
The Primary station is an FT2000 w/SB221 into a hexbeam for 10/15/20m at 33 feet.
The photos show the aluminum tower I installed here in the Summer of 2010, and the 20m, 15m, and 10m tri-band hexbeam mounted on top.
Also shown is a GAP Eagle antenna for local groundwave and a 40 meter center fed zep antenna for 40 meters.
Thank you for the QSO!
If we worked on 7.030 then most likely I was using my new 3 Watt QRP XTAL kit. I completed it in June 2015 and enjoy using it with my home antenna and a small amp when needed. It has a direct conversion receiver with a 2 pole filter and a built in keyer. It is roughly the size of a pack of cigarettes and uses 15 milliamps on receive. It sounds like a dream, nothing to get in the way of the signal.
6213565 Last modified: 2015-07-16 00:24:23, 1714 bytes
You must be logged in to file a report on this page
This callsign does not participate in the QRZ Logbook