QRZ.COM
ad: L-HROutlet
ad: l-rl
ad: L-rfparts
ad: Subscribe
DL3IKE Germany flag Germany

Login is required for additional detail.

QSL: QSL: VIA BUREAU OR DIRECT

Email: Login required to view

Ham Member Lookups: 2277

 

DL3IKE

Latest activity from 13.-17. July 2017:

OZ-DL3IKE/P in Vadehavet Nationalpark, Blavand, Danmark, Northsea-coast

TRX: Icom IC-707 + LDG AT7000 Tuner

Kite-Antenna: Zeppeline-Antenne made of 19,4m CQ553 + 48,6m wire at ~ 15-35m hight

Power-supply: 100W solar panel, buffered by ~ 115 Farad Maxwell BOOSTCAP, 

 

 

 

 

 

 

At home qth:

TRX:

YAESU FT-817 for QRP and LF/MF

Icom IC-735 or IC-707 + LDG AT7000 Tuner

mobile: Yaesu FT-7900

portable: Icom ID51E

 

Antenna:

2x ~20m Dipole, 9-10m over ground, made of 6 x 2x0,6mm isolated Cu-cable with 6,5m Feeder, made of 2.5mm² Cu-loudspeakercable

self made coupler. <= didn´t work well. I use at the moment my LDG AT-7000 Tuner.

Dieses Bild entstand auf dem "Siemens-Hochhaus" in Bremen. Im Hintergrund sieht man das Weser-Stadion, einige Mobilfunk- und Richtfunkantennen und die 2m Antenne von DB0WU http://www-user.uni-bremen.de/~dj1kn/db0wu001.htm

Me, on a cellular phone site in Bremen

 

Meine aus Alu-Blitzschutzdraht selbstgebaute 2m / 70cm J-Antenne:

self made J-pole antenna for 2m and 70cm

 

Me, 135m over ground  at db0ou:

 

My offshore-QTH DolWin alpha. It´s a converter platform for transmitting the energy of windfarms in the Northsee via high-voltage-DC link (+/- 320kV) to the german power grid. The locator is JO33fx.

Unfortunately this platform also produces a lot of QRM so the bands below 40m are nearly unuseable because of S9 to S9+20dB noise level. On the top-deck the noise level is much stronger then below the platform.

My antenna is a 18m long wire, hanging below the staircase to 3-4m over seelevel. I´m using my Icom IC-707 transceifer an the LDG AT7000 tuner (in the plastic box) to match the antenna.

   

 

News:

DL3IKE/P 10,368GHz Beacon is since 22.09.2016 18:30UTC on air. 

Antenna: 10 slot antenna ~ 10dB gain, beaming SE direction

TX: Kuhne MKU10 with ~200mW

Morsecode from Arduino

Locator: JO33fx DolWin alpha platform, ~65m over sealevel

The beacon will probably be until 26.09.2016 on air. 

Update: the keying of the beacon has a problem. The beacon sounds like a bird ;-). The problem is under investigation but I´m not sure to solve it here. 

Update 11.10.16: did some mods on keying and morse-code. Beacon is on air, probably until  16th. Please QSL if You hear it. TNX!

 

 

 

 

8225380 Last modified: 2017-07-19 12:35:14, 4611 bytes

Login Required

Login is required for additional detail.

You must be logged in to file a report on this page

Please login now...

Public Logbook data is temporarily not available for this user
ad: giga-db
Copyright © 2017 by QRZ.COM
Sat Nov 25 05:37:54 2017 UTC
CPU: 0.043 sec 61116 bytes mp