QRZ.COM
ad: L-HROutlet
ad: l-rl
ad: Subscribe
2E0FEI England flag England

Login is required for additional detail.

Email: Login required to view

Ham Member Lookups: 4083

 

This is me when I first passed my foundation licence in 2015

 

This is my station now!

If we have had a QSO, I thank you for the pleasure.

​I spent most of the 44 years of my working career maintaining radio & transmission line equipment. This was on commercial and military installations. For some of the last few years I was involved with technical support for data communications and data networking. Finally I was involved in training for the planning of optic fibre networks and fibre distribution as an industry accredited trainer.
I have repaired and serviced radio's for more years than I care to remember.

​I first became interested in amateur radio more than 30 years ago and had always intended to sit the exams for my licence. It is only in my retirement that I have had the time to do so. I successfully attained my foundation licence in February 2015 and  I have now attained my intermediate licence and received my callsign of 2E0FEI. Hopefully the full licence will follow in 2017

My  HF antenna is a HW-42HP, an Off Centre Fed Dipole with the centre at 8.5 m and both sides dropping to 6m over their respective length.

It is dog-legged to fit in my garden.

 

A GP-2500 HF vertical is mounted to the side of the house.

 

In the shack is a Yaesu FT-757GX II with a Yaesu FC-757AT auto tuner and an AV 508 Desk Microphone. 

There is also is Icom IC-7100 with a LDG IT-100 autotuner and a BM-800 condenser Mic on a boom . Have now added a Behringer Tube Ultragain Mic 100 pre amplfier & limiter to the BM-800. Mic gain down to 15% on IC-7100 and some excellent audio reports.

These are used for HF, 6m, 4m, 2m and 70cm. The Icom is also used for digital voice.

​For 2m & 70cm I use an  X-300N colinear mounted on the side of my house.

I have a Zumspot Libre connected to a Raspberry Pi 3 running  the Pi-Star MMDVM image. This is installed in a customised case.

A Tytera MD-380 HT is used for DMR and an Icom IC-E92D HT for Dstar.

The main PSU is a MAAS 50A power supply. 

​Thank you for viewing my page.

73's and good DXing.

Bill 2E0FEI

 

 

8426380 Last modified: 2017-11-02 11:57:29, 3274 bytes

Login Required

Login is required for additional detail.

You must be logged in to file a report on this page

Please login now...

Public Logbook data is temporarily not available for this user
ad: giga-db
Copyright © 2018 by QRZ.COM
Thu Jan 18 00:14:37 2018 UTC
CPU: 0.050 sec 59269 bytes mp