Big Mess in the shack---But Functional plus a window seat.

That is Denny K0TT doing most of the hard work on the tower.

 80 Meter 4 Square

Radio:   ICOM  IC-781  HF TRANSCEIVER

Amplifiers:   Henry Radio 3K-Ultra or Henry Radio SS-750 Solid State.

Modes:   SSB using an Astatic Non Amplified D-104 Microphone. dbx 166A compressor limiter used for impedance matching between the microphone and IC-781 radio.          CW with a Bencher Paddle.     RTTY using MMTTY & the W3YY FSK interface.     All contesting is with N1MM+ Logger Software. 

Antennas:  Yes, lots of them.  Keep reading.

10 Meters,   7 Element 44' Boom M2 Monoband Yagi.

15 Meters,   6 Element 44' Boom M2 Monoband Yagi.

20 Meters,   6 Element 58' Boom KLM Type Monoband Yagi (Dual driven element).

40 Meters,   3 Element 42' Boom DX Engineering Full Size Monoband Yagi.

80 Meters,   4 Square Array by ColAtchCo using 4 Base Insulated 1/4 Wavelength Rohn 25G Towers with 20 Elevated Radials per Tower.  All four towers are insulated and fed at 10' above ground level.

160 Meters,   6 Wire Cage Folded Unipole (Shunt Feed Method) Fed through a T-Match using a Rohn 55G Tower with 14 Elevated Radials. This tower also has the 20 & 40 meter yagi's to add some top loading.

Will QSL with SASE or through LOTW and or eQSL.cc