QRZ.COM
ad: L-HROutlet
ad: l-rl
ad: L-rfparts
ad: Subscribe
ad: l-gcopper
W7WRJ USA flag USA

alias for: KE7WRJ


Login is required for additional detail.

QSL: Life is too short for paper QSLs.We use LoTW and EQSL

Email: Login required to view

Premium Subscriber Lookups: 7401

 

  • I will listen, and listen, and then listen again before calling.
  • I will only call if I can copy the DX station properly.
  • I will not trust the DX cluster and will be sure of the DX station's call sign before calling.
  • I will not interfere with the DX station nor anyone calling and will never tune up on the DX frequency or in the QSX slot.
  • I will wait for the DX station to end a contact before I call.
  • I will always send my full call sign.
  • I will call and then listen for a reasonable interval. I will not call continuously.
  • I will not transmit when the DX operator calls another call sign, not mine.
  • I will not transmit when the DX operator queries a call sign not like mine.
  • I will not transmit when the DX station requests geographic areas other than mine.
  • When the DX operator calls me, I will not repeat my call sign unless I think he has copied it incorrectly.
  • I will be thankful if and when I do make a contact.
  • I will respect my fellow hams and conduct myself so as to earn their respect. 

 

Thanks for visiting my QRZ page.  I was first licensed in Oct 2009, as a General.  The DX bug got me and I upgraded to Extra Class in Nov. 2011. From July 2013 though October 2016 I accecpted a positon in S. Korea and moved with the family over there.  I operated as HL1ZAI for 3 years.  It was fun, operating from the "Other Side" of the DX contact and I obtained my DXCC from Korea in 9 months.  Upon returning to the home QTH in Oct 2016, my main goal was to get the home station back up and operational with many planned improvements.   My main interest are DXing and building all of my own antenna's and amplifiers.   I can normally be found someplace on 40 meters in the morning and evenings.




Ham Shack Retrofit
Below is a series of pictures taken during my Shack Retrofit.
 I'm finally happy with the layout.
 I've built in RF Patch panels, and can now run 3 stations at the same time.

 

Building the bases outside, hope they fit through the door....

 


Bases moved indoors and stained a nice dark blue.
 

 

Have the funiture grade maple plywood on the bases, stained and finshed.

 


Here's a picture of the main operating console.
 All of the main equipment is in place, grounding is completed and all of RF connections are done.  The new OM Power 2000+ Amplifier has been received and is running like a champ.

 

 

Heres a full view of the new shack, with the work area on the left.
 The work area also includes it's own RF patch panel, microphone/headset audio lines and radio/amplifier key lines, and can be switch to a 2nd and 3rd operating positions in just a few minutes.

 

Heres a full view of the cable entrance panel on the inside of the shack.

To install I core drilled 2 4 inch holes through the 8 inch solid block.  I used 12 inch PL259 barrel connectors for the RF feeds.  It's currently set up for 5 RF connections and can be expanded to 7.  The rotor and control cables come through a 1 3/4 inch conduit pipe through the same plate.  There are 4 8 conductor rotor cables and a 25 pair control cable for the coax switches and other items outside that need to be controlled.  Connections on the outside are 2 runs of 3/4 inch heliax and 2 runs of 1/2" heliax, that all go to a central point out in the antenna field, and then fed to one of the 4 towers.

 

Current Equipment:

TRANSCEIVERS

Flex Radio 6500

Flex Radio 5000

Flex Radio 3000

ICOM IC-765
 

AMPLIFIERS

OM Power 2000+

National NCL-2000

Henry 2K

Heathkit HL-2200 (Up for Sale)

Heathkit SB-200 (Up for Sale)

Collins 30L-1 (Up for Sale)


ANTENNAS

40 Meter 2 element Yagi at 90 feet (soon to be 3 elements)

20 Meter 5 element Yagi at 100 feet

17 Meter 4 element Yagi at 68 feet

15 Meter 6 element Yagi at 70 feet

Veritcal antennas include 5/8 wavelength verticals for 20, 15, 17 meters

Veritcal 1/4 wavelength for 40 meters and a  1/2 wavelength vertical dipole for 80 meters.

All antennas are home brewed.....


UPCOMING PROJECTS

IP Base controlled Antenna Switching for all antennas

Building a new 2 X GS-35B Amplifier

Graphical Power/SWR meter based on the Teensy 3.2 processor

New 40 foot crankup tower that will be topped with a 10/12 meter yagi with 5 elements on 10 meters and 4 elements on 12 meters

 


DXing TOOLS that I Like to Use
 

WE USE LoTW

Put your money into your station and not sending QSL cards.  Get your contacts confirmed in hours or days rather than months and years



There's nothing like knowing the latest Solor Conditions



DX Watch is the best filter-able Web base Cluster that I've found - It allows you to fine tune what your looking for

 

 

Look forward to meeting you on the air soon!

73's and good DX to all.

 

8251748 Last modified: 2017-08-03 01:18:47, 13149 bytes

Login Required

Login is required for additional detail.


Apply for a new Vanity callsign...

You must be logged in to file a report on this page

Please login now...

Public Logbook data is temporarily not available for this user
ad: giga-db
Copyright © 2017 by QRZ.COM
Fri Sep 22 22:36:43 2017 UTC
CPU: 0.058 sec 73804 bytes mp