ad: GNOHF-1
ad: L-HROutlet
ad: l-rl
ad: l-gcopper
ad: K3QNTad-1
ad: L-rfparts
ad: Subscribe
OZ1AAR Denmark flag Denmark

Login is required for additional detail.


Email: Login required to view

Ham Member Lookups: 11861

First of all: I became a member of EDR in 1972.
I am also member of Birkeroed Amateur Radio Club OZ5BIR.
I got my amateur radio license category "B" in 1973 and "A" category in 1974.
During the summer periods, I do have a weekly watch on the museum ship the frigate "Peder Skram´s"
Radio Shack. The frigates radio equipments are from the 1960s. The radio equipment still functions,
today as an amateur radio station OZ1RDN. You are most welcome on board and pass the Radio
shack for an eye ball QSO about the good old days, when practically all radio communications
took place via the CW key and ofcourse some very good operators.

The frigate is currently berthed at the Navy Base "Nyholm", Copenhagen



I prefer absolutely to exchange QSL via E-QSL or LOTW.
Paper QSL cards will be answered via QSL bureau when time permits.


Amateur Radio sure is GREAT plessure.

Thanks for our QSO and for looking me up on QRZ.COM.
I hope we may have CW QSO again on the HF bands.
My working conditions are as follows: Elecraft K3, 100W
Antenna setup for the time being; a vertical multiband loop (30-10m) and a horizontal loop (80-10m),
can be a real good combination for diversity operationerations especially on the top bands.
April 5th 2012 I got my 2 elm. 3 bander GEM QUAD mounted
atop of my 10m high tower, some adjustemt may still be need.
During the summer of 2013, I also installed the 17m/12 meter bands.
My 5 bands 2 element GEM QUAD operates fairly reasonable on all 5 HF bands
20m - 10m and only feeded through the same 50 ohm coaxcable.
So look forward to work you on this for me nice piece of toys
The Yaesu G-1000DXC is just turning the Quad at your direction for maximum QSA
The black line is my horizontal loop antenna in total circumference 92 meters. The red line is a 450 ohm
open feedline just about 15 meters in length from my differential T antenna tuner at the radio shack. Highest
point in the antenna system is the feed point 12 meters above the ground, or 6 meters above the roof top.
Lowest point of the loop antenna is almost 7 meters above the ground. The loop antenna can easily be tuned
to all bands between 80 and 10 meters. In the winter time I open the loop to 2x40 meters, and the antenna
system becomes almost changed to a dipole antenna, and now I can easily work the 160 meter band.
The disadvantage of this is unfortunately, that the noise level increase some decibels.

I will listen, and listen, and then listen again before calling.
I will only call if I can copy the DX station properly.
I will not trust the DX cluster and will be sure of the DX station's call sign before calling.
I will not interfere with the DX station nor anyone calling and will never tune up on the DX frequency or in the QSX slot.
I will wait for the DX station to end a contact before I call.
I will always send my full call sign.
I will call and then listen for a reasonable interval. I will not call continuously.
I will not transmit when the DX operator calls another call sign, not mine.
I will not transmit when the DX operator queries a call sign not like mine.
I will not transmit when the DX station requests geographic areas other than mine.
I will not repeat my call sign, When the DX operator calls me, unless I think he has copied it incorrectly.
I will be thankful if and when I do make a contact.
I will respect my fellow hams and conduct myself so as to earn their respect.


Also member of ARRL



7715746 Last modified: 2016-11-23 18:31:46, 7738 bytes

Login Required

Login is required for additional detail.

You must be logged in to file a report on this page

Please login now...

Public Logbook data is temporarily not available for this user
ad: giga-db
Copyright © 2017 by QRZ.COM
Tue Oct 24 11:55:36 2017 UTC
CPU: 0.047 sec 64093 bytes mp