ad: L-HROutlet
ad: l-rl
ad: Subscribe
ad: L-rfparts
ad: l-gcopper
PA4H Netherlands flag Netherlands

Login is required for additional detail.


Email: Login required to view

Ham Member Lookups: 2246


Licensed since 1978 as PE1BWI. Since 2009 changed to PA4H. I have an old but beautifull TS-830S but most contacts are made with my home brew equipment. On 20 meter I use a home designed 10 Watt USB/CW transceiver based on the BITX-20 design or a 2Watt QRP CW transceiver MFJ9320. When conditions are not so good I add a home made 100Watt+ tube amplifier made from two EL519's TV sweep tubes. On 80 meter I use my little 5 watt MKARS80 LSB/CW 80 meter transceiver with a home build 50 Watt FET push pull amplifier. Finished the design and construction of a home design10 Watt CW transceiver for 7MHz. Winter project for 2012/2013 was a home designed two band CW TRX for 30 and 15 meter, VXO tuned, 16MHz IF  with 6Watt class E PA. See the center picture below. The left picture shows my home made ILER 40 with DDS and home designed 30Watt FET push-pull amplifier. Finally the rigth picture shows my current antenna situation, a linear loaded dipole with home made tuner. Sometimes I use an end fed half wave for 20 meter or 40 meter. I do not collect QSL cards, so please save them for other HAM's.


6146591 Last modified: 2015-07-16 00:19:02, 1393 bytes

Login Required

Login is required for additional detail.

You must be logged in to file a report on this page

Please login now...

Public Logbook data is temporarily not available for this user
ad: giga-db
Copyright © 2017 by QRZ.COM
Wed Aug 23 13:56:03 2017 UTC
CPU: 0.057 sec 57856 bytes mp