QRZ.COM
ad: L-HROutlet
ad: l-rl
ad: Subscribe
ad: l-gcopper
ad: L-rfparts
VE6ND Canada flag Canada

Login is required for additional detail.

QSL: Direct

Email: Login required to view

Ham Member Lookups: 2824

 

435 uplink/downlinkSatellite array pointed SW 2.4 and 1.2 not yet installed

For my satellite stations, I use the 2510 transverter and a 817, makes for a good combo.

One 817 has been given a new mic..Found it on ebay and rewired to internals for an electret mic, works very well, better than the original hand mic.

The one table shows two 821's, one will eventually be used for portable excursions. The newest addition are two M2 antennas, the EB-432 and the EB-144. These will be used with one of the 821's.

The Ten Tec 2510's work well on the new EO-79 satellite. These transverters were originally designed for OSCAR 10.

The photo of the the small crossed yagi is a 435 RHCP that started out as a turnstile and the directors are from a pieced out Harris satcom antenna that I didn't want to discard and so is the reflector grid made from an AV-2040 with broken elements. Made this works very well for terrestrial and satellites.

The outdoor photo is a Trivec Avant AV-2040 for OSCAR and the VHF is a homebrew RHCP based on a turnstile.

Icom IC-821H and a homebrew crossed yagi for 2 meters and a UB-7030sat from Hy-gain. There is a 2.4Ghz dish going on the mount. 

There will be a 6' mesh dish on the mount for 1.2 and 2.4 Ghz just building a mount for the elevation rotator.

New Ford Escape and I have the FT-897D and a IC-2820H for FM simplex and satellite. I have another 2820H that I use for portable satellite and FM use.

 

73!

7829548 Last modified: 2017-01-13 23:04:36, 2466 bytes

Login Required

Login is required for additional detail.

You must be logged in to file a report on this page

Please login now...

Public Logbook data is temporarily not available for this user
ad: giga-db
Copyright © 2017 by QRZ.COM
Thu Sep 21 07:03:29 2017 UTC
CPU: 0.051 sec 59076 bytes mp