QRZ.COM
ad: L-HROutlet
ad: l-rl
ad: Subscribe
VK5MAS Australia flag Australia

Login is required for additional detail.

QSL: eQSL or request via email.

Email: Login required to view

Ham Member Lookups: 1064

 

Hi I am Andrew VK5MAS, thanks for visiting.

My QTH is Mount Gambier South Australia.

I was issued a Foundation Licence in March 2015 VK5FADS and

Upgraded to a Standard Licence in August 2015 VK5MAS.

 

So, quite new to Amateur Radio.

My HF rig is a Yaesu FT1000D hooked up to a 40m 1/2 wave dipole about 7-8m in the air.  The pic shows an inverted v config, but it is now horizontal.

 

In the shack I have a Yaesu FT991 hooked up to the

dual band VHF/UHF vertical ground plane.

Yaesu FTM100D to play Fusion. My WiresX node is 24252

My mobile rig is an Icom IC208H as a mobile rig. 

 

My tower is now vertical at about 12m high.  I have a Hygain TH6 currently having a few repairs and maintenance which will be coupled with a Yaesu G-1000DXA rotator.  I had some 10mm steel laser cut for the thrust bearing plate and the rotator mount is a plate made of 5mm.  Below is some of the templates for the thrust bearing plate. 

 

 

As you can see in the picture above I am in a rural location which makes the noise floor minimal. 

 

 

I try and get a few entries in the log when I can.  I use HRD as my logging program.

I am happy to exchange QSL cards by eQSL or email VK5MAS@WIA.ORG.AU

73's 

 

 

8395495 Last modified: 2017-10-18 10:08:18, 4417 bytes

Login Required

Login is required for additional detail.

You must be logged in to file a report on this page

Please login now...

Public Logbook data is temporarily not available for this user
ad: giga-db
Copyright © 2018 by QRZ.COM
Sun Jan 21 00:33:34 2018 UTC
CPU: 0.050 sec 60379 bytes mp