ad: TiltPlate-1
ad: L-HROutlet
ad: l-rl
ad: L-rfparts
ad: Subscribe
ad: l-assoc
ad: l-gcopper
VY2GF Canada flag Canada

Login is required for additional detail.

Email: Login required to view

Ham Member Lookups: 4556


I’m a retired pilot qualified on both fixed wing and helicopters. The bulk of my flying career was with Transport Canada, the Canadian aviation regulator and Nav Canada, the air navigation system operator. Back in 1964/65 I worked as an air traffic controller in Gander located in the province of Newfoundland and Labrador.  After forty one years living in New Brunswick it was time to come home so we're now resident on the family farm. I became licensed in 1995 and my callsign from New Brunswick was VE9GFD.

If you go to the listed position from my details and look West on Google Earth Streetviews the house is 150 feet from the road.  The physical address is 57 Perth Station Road in the farming community of New Perth.

I run 100w on a Kenwood TS-2000 using a Cushcraft MA-5B and a Gap Titan.  For VHF/UHF I use a Comet GP-3. My mobile is a Kenwood D710 with APRS (VY2GF-9) capability. The antenna mast was constructed by my cousin who has a well equipped machine shop. The primary member is 2” X 2” aluminum tube inside a 3” X 3” tube. The beam is normally at 24’ and can be extended to 37’. The mast can be tilted over for maintenance and during extreme weather conditions.

I hold the callsign VY2PLH used for Prince Edward Island lighthouse (www.peilighthousesociety.ca) activations.

My cousin testing the tilt function.

Looking Northeast. The box on the house is an air to air heat pump.

Steel base.

Basic plan.

7928599 Last modified: 2017-02-26 03:48:39, 1909 bytes

Login Required

Login is required for additional detail.

You must be logged in to file a report on this page

Please login now...

ad: giga-db
Copyright © 2017 by QRZ.COM
Fri Apr 28 17:50:59 2017 UTC
CPU: 0.043 sec 58381 bytes mp