The Tower project. All is painted gloss black enamel.

May-28-2013

Tower tilts over with homemade tilt base, with 800 lb wench, with 650 lb pulley at 21 feet up support structure. Support structure is 6 x 6 with 4 x 6 on the inside of lower post. Steel support beams running across the from each support . Tower tied to middle support beam with large u-bolt.

Ground elevation is 860 feet, tower is located on ridge running East and West.

Rohn 25-G, 32 feet, 7 feet of 1.25 inch pipe mask, with Mosley TA-33jr and 5 element 2 meter yagi.

Dipoles are 80 / 40 meter dipole and 30 / 17 meter dipole.

Richard