Shack is still under development...

At least the lab bench is starting to get usable, as you can see...

 

 

 

 

 

Equipment in Use:

2m/70cm

Baofeng UV5R+ (FM)
ICOM IC3200 (FM)

Digital

ICOM IC-31A (FM, D-Star)
Hytera MD365 (FM, DMR+)
Tytera MD-380G (FM, DMR+ just for worse case testing)
Baofeng DM-5R+ (FM, some sub Tier I DMR-ish)
DV4mini on Raspberry Pi 3 (All digital)
DV4home
DV4home2

Ready for the Shack

ICOM IC-730A (re-capping done, in calibration)
ICOM AT-500 (500W Tuner)
ICOM 2KL (500W Amp)

Retired Equipment

Baofeng DM5R+ (FM, but on DMR it is just trash)
Kenwood TR-7800
(I repaired it and used it for my first ever QSO after having my license)

In Restauration

ICOM IC-720A (restauration in progress)
ICOM IC-271E
ICOM IC-451A (dead, needs restauration)
ICOM IC-471E (No TX, only FM RX)
ICOM IC-471E (RX close to OK, no TX)
ICOM IC-1271A (dead, needs restauration)
YAESU FT890 (dead. Somebody killed it)

Restored for friends

ICOM IC-761A (no TX)
TenTec 555 "Scout" (No TX)
YAESU FT-7800 (No RX on 2m)

Things I search

Most units I got are modified, altered, killed, scrambled... So I look for original bolts, nuts, screws, rubber feet, side bumpers, handles.

Testgear I own for hobby purpose 

R&S SMDU + SMDU Z1 1050MHz Radio Test Set
R&S URY + URY-Z4 + URY-Z7 Millivoltmeter (same as URV5)
HAMEG HM8021-3 1.6GHz Counter
Agilent 33120A 15MHz Function / Arb. Waveform Generator
Agilent 6632B Power Supply
Agilent 54622D Mixed Signal Scope
Agilent DSO6014A Mixed Signal Scope
MFJ-993B Antenna Tuner and Power Meter
Philips PM2525 Multimeter (with probes >100A, >30kV, >1GHz)

Why it takes so long to install my shack?

I am totally busy to program for DV4mini, DV4home and DV4mobile...

...Pictures to follow...