It is great being a member of the ham community, localy and world wide.
I enjoy being on the air, and I enjoy building antennas, tuners and small equipment.
I am QRV on HF, on ssb, psk, cw, rtty and j65
Looking forward to meet you on the air !
MODE: CW, SSB, D-Star, PSK, RTTY
BAND: 80, 40, 20, 17, 12, 10: PWR 1 K Watt
BAND: 2 meter, 70 cm : 100 watt
Transceiver 1: Flexradio-6500: HF/6 m all band, all mode transceiver, Transceiver 2: KX3 : HF/6 m all band, all mode transceiver: Transceiver 3: Icom 910H: 144 MHz/430 MHz.Linear amplifier:spe Expert 2 K - FA Microphone: Heil Headset. HC-6. Key: kent single padle. Antenna 1 : Dipol. 80 m band). Antenna 2: Two in Line phased vertikal (40 m band) Antenna 3: Mosley 3 el yagi. 10 m above ground. (10, 12, 15, 17 and 20 m band) . Antenna 4: Magnetic loop(20 m band) Antenna5: Diamond 2 meter and 70 cm band . 10 m above ground. Software: Ham Radio Deluxe
I WILL ALWAYS TRY TO FOLLOW THE DX CODE OF CONDUCT
I will listen, and listen, and then listen again before calling.
I will only call if I can copy the DX station properly.
I will not trust the DX cluster and will be sure of the DXstation's call sign before calling.
I will not interfere with the DX station nor anyone calling and will never tune up on the DX frequency or in the QSX slot.
I will wait for the DX station to end a contact before I call.
I will always send my full call sign.
I will call and then listen for a reasonable interval. I will not call continuously.
I will not transmit when the DX operator calls another call sign, not mine.
I will not transmit when the DX operator queries a call sign not like mine.
I will not transmit when the DX station requests geographic areas other than mine.
I will not repeat my call sign, When the DX operator calls me, unless I think he has copied it incorrectly.
I will be thankful if and when I do make a contact.
I will respect my fellow hams and conduct myself so as to earn their respect.
If on air: QRV Freq. and mode, (may take a moment to update)