Burg (Castle) Strechau near my QTH
and a view pictures more ...
after a mountainbike tour, i collect some mushrooms ...
Now some informations about my HF-equipment
The antenna will cover from 20m-10m. If you have an external ATU it can also be persuaded to cover 40m and
Feed is at the centre and a balun is present to isolate the transmission line and provide some type of impedance matching. It's quite a lightweight antenna at 4.5 kg -the construction is very good quality and all the components first rate. I do recommend guying the antenna however. There is a lower noise floor with the I-Pro-Home.
For operating on 40m and 80m HF-Bands i use Limited Space High Performance Antennas from Alpha Delta
DX-CC - No-Trap- 80-40-20-15-10 meter dipole or inverted-V. Overall length is 82 ft. is 25 Meter
The following figure shows the assignment of state-digits
On my second QTH I am using a HyEndFed (40-20-10 Meter Band) Antenna
It is a half wave wire antenna, due a low loss (~0,8 - 1,1dB) matching network.
Max.power: 200 Watt PEP, Length: 11,85 meter, no radials or tuner needed.
Excellent radiation efficiency due resonant design and low loss parts!
Best regards ... Gerhard
23.01.2015, 08.35 I had a QSO with VK16AC with my HyEndFed and 40 Watts.
Some SWR measurements - HyEndFed Wire Antenna !
A few films about amateur radio
Digitale Spielwiese ... C4FM, DStar, DMR ... mit Home- und Mobil-Hotspot
Raspberry Pi2 mit 5V Akku Spannungsversorgung (Powerbank RAVPower 10050mAh)
DVmega for DStar
7264606 Last modified: 2016-04-24 10:58:59, 11489 bytes
You must be logged in to file a report on this page
Book Totals: 42 qso's 36 confirmed Get a free logbook at QRZ.COM