During August 2017 mainly operating as IZ0INX/0 from my vacation QTH located in Rio Claro (JN61QH10) QRP 5w and homebrew antennas (vertical dipole fed by 450 ohm ladder line + remote tuner or random wire + 9:1 UNUN)
Thanks so much for any QSO I may have with you

Hi, my name is Filippo (Fil on DX), I'm 62 years old and live in Rome, Italy. I work as IT manager in a pharmaceutical research company. I'm married with Patrizia (swl I120/RM) and have a beautiful daughter, Alice. I played with CB transceivers during 70's, having several exciting DX and since 1976 I became SWL (Nr.65696, then changed to I0078/RM). Finally, in 2006 I got my OM license.

I like building antennas, general ham homebrewing and performing DX with just 100W. I started with a homebrew fishing-pole antenna and finally, in September 2008, I've been able to install my Butternut HF9V-X on the roof. Since August 18th 2011 my verticals have been replaced by 3 Yagi: a 4 el. 7 bands for HF (Eco DHF6), a 5 el. for 6m (DK7ZB) and a 5+8 el. for 2m/70cm (DK7ZB). I also like /p operations in QRP.

QSL:

I will answer 100% to everybody, via direct, bureau and eQSL (AG member). I also regularly upload my Log to LoTW. For direct QSL no IRC or green stamps are required, but a SAE would be appreciated. If you have sent me a QSL without receiving reply, please send me an email, thanks.

Hope to meet with you on HF/VHF/UHF, phone, digital or CW (only QRS for now, I'm still learning  :-) )

73 de Fil, IZØINX

www.iz0inx.it

Click HERE to see my QTH

 

Memberships:

.-. -050 EPC 4090 A.R.M.I. MI806

ARI ARRL eQSL LoTW

 

QTH: DHF6 4el. 7bands HF,  DK7ZB 5el. 6m,  DK7ZB 5+8el. 2m/70cm

 

Mast Pro.Sis.Tel. PST 600/8C and Rotator Yaesu G-1000 DXA

 

This is the former antenna setup, with the Butternut HF9V and the Diamond X-50N:

 

IZ0INX/p

 

IZ0INX/m

 

Here are my toys .....

=============================================

RIG1:

• Kenwood TS-440S-AT
• Mic: Kenwood MC-60
• Key: vertical
• Speaker: Kenwood SP-430
• Power Supply: Kenwood PS-430

=============================================

RIG2:

• Yaesu FT-897D
• ATU: LDG AT-897
• Mic1: Yaesu MH-31
• Mic2: Yaesu MH-59
• Headset1: Monacor BH-008 modifiyed with electrect mic
• Headset2: Trust (4.90€) with homebrew interface
• Key: KENPRO KK-70
• Speaker: Yaesu SP-767
• Power Supply: Yaesu FP30

=============================================

Portables:

• Yaesu FT-817nd
• Kenwood TH-F7e
• ICOM IC-R10

=============================================

Antennas:

QTH1:

• 10m, 12m, 15m, 17m, 20m, 30m, 40m: Eco DHF6 (Yagi 4 trapped el.)
• 40m, 80m: Diamond W-8010 (inverted V dipole)
• 6m: DK7ZB 5 elements yagi (by vpa-systems.pl)
• 2m/70cm:DK7ZB 5+8 elements yagi (by vpa-systems.pl)
• Rotator: Yaesu G-1000 DXA
• homebrew Magnetic Loop
• homebrew VHF/UHF J-Pole
• Yaesu ATAS-120A (/m)
• Eco monoband whips (/m)
• WonderWand L-Whip (/p)
• vertical IK0ISD (/p)
• dipole DiamondDP-7RH(/p)
• discone T734
• Dressler ARA-60

QTH2:

• PKW L20 Inverted V multiband dipole
• homebrew Rybakov 8.6m (Iron pole)
• homebrew longwire (86m)
• A2E X510N

=============================================

Accessories:

• SWR meter1: Kenwood SW-200 + SWC-1
• SWR meter2: Kenwood SW-2000 + SWC-2 + SWC-3
• SWR meter3: Diamond SX-200
• SWR meter4: LDG FT-Meter
• Tuner: MFJ 993B
• Digimode i/f: DK4MX and OE5GPL/OE5KAL (by I5XWW), G4ZLP cables
• Remote Coax Switch: RC4 by IZ2HFG ("mezzo litro")
• Coax switch: AE CRS1100B
• Coax switch: Alpha-Delta Delta-2
• Analyzer #1: Mfj-259b
• Analyzer #2: mRS miniVNA
• Analyzer #3: RigExpert AA-54

=============================================

SW:

• Ham Radio Deluxe Suite V4.1 SP4 b2312
• Yaesu ADMS-4B
• ICOM CS-R10SU
• Kenwood MCP-F6/F7
• GetCW
• TypeCW
• TrueTTY
• 4NEC2 v5.6.2
• Morse Runner 1.68
• Radioutilitario
• ... and more

=============================================

http://www.iz0inx.it