QRZ.COM
ad: LZQSLprint-1
ad: L-HROutlet
ad: l-rl
ad: Left-2
ad: Radclub22-2
ad: L-MFJ
ad: abrind-2
ad: Left-3
Latest Awards
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued
United States Awards Issued

Logbook 3.0 Documentation

Export to Logbook of the World

This guide will show you how to retrieve the LoTW certificate which QRZ Logbook requires for direct uploads to ARRL’s Logbook of the World (LoTW). This guide requires that you already have TQSL, and a valid certificate from LoTW.

Note: This is a QRZ subscriber-only feature 

 

Note: QRZ does not provide support for LoTW beyond our interface to it. If you need assistance getting TQSL, a LoTW account, or a LoTW certificate, see the official Logbook of the World Instructions page here: https://www.arrl.org/lotw-help

 

Step 1: Open TrustedQSL (TQSL), and select the "Callsign Certificates" tab to display all available certificates.

 

Step 2: Right-click on the certificate that matches the callsign of the QRZ Logbook that you wish to enable LoTW access for and select “Save Certificate to File…”


 

Step 3: Browse to the location where you wish to store the certificate file and save the “CALL.p12” file. This location will be required later in the process.

 

Step 4: If you wish, you may enter a password, then click “OK.”

Note: ARRL LoTW support does not recommend setting a password during this step.
Note: You must remember this password! QRZ does not store this password and CANNOT reset it for you
Note: Some versions of TQSL may refer to this as a passphrase rather than a password.

 

 - or - 

 

Step 5a: From the QRZ Logbook LoTW Access Setup page, select “Choose File.”

Note: The documentation for this step has not been updated. The interface shown may differ slightly from those shown below

 

 

 Step 5b: Browse to the location of the saved “CALL.p12” file from Step 3. Select the “CALL.p12” file, and select “Open.”

 

Step 6: Enter your LoTW username and password and click “Save.”

Step 6a. You will be prompted for a certificate password. If you entered one in Step 4, enter it again here. If you did not enter a password in step 4, leave this blank.

 

Sending Individual Records

You can now send QSOs directly from QRZ Logbook to LoTW by selecting the checkbox of the QSO(s) you wish to send to LoTW, clicking “Actions”, then selecting “Send the selected records to LoTW.” A password box will appear where you can enter the password from Step 4, or leave it blank if you did not enter a password in Step 4. Clicking “Continue.”

 

Sending All New or Changed Records

You can also send ALL QSOs in your logbook directly to LoTW by using the “Export and send to LoTW” button on the “Settings” page of the QRZ Logbook. (Highlighted in red below.) This will prompt you for a password. Again, this is the password you entered in Step 4. If you did not enter a password in Step 4, leave this blank.


This page was last updated December 18, 2023 19:09